Posts

New Improved Solar Tile Hook

What Makes Our Solar Tile Hook Unique?

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Hook, there’s no cutting required, saving you time on your project. Our Solar Tile Hooks are available for low, medium, and high profile tile roofs, and are adjustable up to six inches for easy installation for secure attachment to the structural member of the roof. With our unlimited FREE engineered layout on all your projects, we guarantee our Solar Tile Hooks are made of the highest quality for superior strength.

Our high-quality Solar Tile Hooks divert the mount around the tile instead of going directly through the tile, which decreases install time and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust.

 

How Will The Solar Tile Hook Benefit Me As An Installer?

 

TRA’s cutting-edge Solar Tile Hooks are:

  –  made of corrosion-resistant extruded aluminum

  –  quick and easy to install

  –  require no cutting

Solar Tile Hooks must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right.

 

Solar Tile Hook

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor– No cutting of the tile required

Materials/Finishes

  • Hook – Stainless Steel
  • Base – 6005A-T6 Aluminum
  • Spacer Block – 6005A-T6 Aluminum

Testing

Solar Tile Hook has been tested from the fail point of the system.

A Stronger Foundation

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. Click here to contact us for an estimate and to begin your Solar Tile Hook plan today!

WE DO CUSTOM SOLAR MOUNTING

At TRA Snow and Sun, we engineer and give detailed layouts of each project for free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

Just give us your project details & we will design your Mounting Solution to fit your project.

What Makes Our Solar Tile Hooks Unique?

What Makes Our Solar Tile Hook Unique?

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Hook, there’s no cutting required, saving you time on your project. Our Solar Tile Hooks are available for low, medium, and high profile tile roofs, and are adjustable up to six inches for easy layout for secure attachment to the structural member of the roof. With our unlimited FREE engineered layout on all your projects, we guarantee our high quality extruded aluminum Solar Tile Hook is made of the highest quality for superior strength.

Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters. *Also available in black anodized.

 Tile Mount Hook

How Will The Solar Tile Hook Benefit Me As An Installer?

Tile Mount Hook3We offer a plethora of installation materials and resources to make experience as simple as plan, purchase and install.

TRA’s cutting-edge tile Hooks are:

  –  made of corrosion-resistant extruded aluminum

  –  quick and easy to install

  –  require no cutting

  –  require no special flashing

Solar hooks must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right.

A Stronger Foundation

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. Click here to contact us for an estimate and to begin your Solar Tile Hook plan today!

Tile Mount Hook2Solar Rail Plus

                                                                                                             Works With Our New Rail Solar Plus!

Solar Tile Hook

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor– No cutting of the tile required
  • Requires no special flashing

Materials/Finishes

  • 6005A-T6 Aluminum / 6005A-T5 Aluminum
  • Mill finish
  • Black Anodized (upon request)

Testing

Solar Tile Hook has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Gary Heslington at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

Universal Solar Tile Hook made to Fit Most Rails

 twiss-residence-hurricane-ut-progressive-power-solutions-tile-mount

What Makes Our Universal Solar Tile Hook Unique?

With TRA Snow and Sun Universal Solar Tile Hook, there’s no cutting required, saving you time on your project. No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. Our unique wide base of the hook makes the mount very easy to adjust. The Universal Solar Tile Hook allows for fast and easy installation and now available for low, medium, and high profile tile roofs, and are adjustable up to six inches for easy layout for secure attachment to the structural member of the roof. With our unlimited FREE engineered layout on all your projects, we guarantee our high-quality extruded aluminum Solar Tile Hooks are made of the highest quality for superior strength.


How Will The Universal Solar Tile Hook Benefit Me As An Installer?

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. All types of Solar Tile Hooks must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. Click here to contact us for an estimate and to begin your Universal Solar Tile Hook plan today!

Universal Solar Tile Hook

Universal Solar Tile Hook 

–   Available for flat, mid and high profile

–   Adjustable for secure attachment to the structural member of the roof

–   Corrosion-resistant materials

–   Quick and easy to mount

  Decrease Labor– No cutting of the tile required

–   Increase the longevity of our micro-inverters

Materials/Finishes

–   6005A-T6 Aluminum / 6005A-T5 Aluminum

–   Mill finish

–   Black Anodized (upon request)

Testing

Universal Solar Tile Hook has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information contact Gary Heslington at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

A Sneak Peak of the Most Amazing People!

From time to time we, at TRA Snow and Sun, run across
the most AMAZING people and when we do…

WE HIRE THEM!

 

TRA Snow and Sun is doing great thanks to an incredible team, our dedication to customer service, manufacturing top-notch products and our wonderful customers! We are 100% American – all products are made right here in the Good Ole US of A! We weathered the downturn in construction and have come out on the other side better than ever.

Our team members are constantly learning and applying their knowledge to our products, procedures and service. A large portion of our office personnel have college degrees, some have graduate degrees! Most attend seminars, webinars and trainings consistently throughout the year. That results in a highly informed, dedicated staff and improved company processes.

imag3202Lisa to Left (Production Manager) & Connie to Right (Accounts Receivable/Shipping) – Making sure your Orders are Shipped in a timely manner. A close look to our busy season in shipping. Go Team!!

 

 

imag3200

Roger – Overseeing and Running the Plasma Cutter for our Snow Retention Products. Watch out as those sparks are flying.

 

 

 

 

imag3195Ryan and Krissy – in the Solar area assembling the popular Solar Tile Mount together for a flush mounted system.

 

 

 

imag3191Bart (Machinist) – Testing out and setting up the Accurpress that stamps both our Solar and Snow Retention Products. Our Solar Products have been dominating this machine.

 

 

imag3185

Julio – Making sure quality is met. You can usually find him forming or stamping our Snow Retention Product lines.

 

 

 

 

imag3183John (Left) and Koy (Right) assembling a raw order of Clamp-on’s for Snow Retention in the paint booth area. Wow, one order without paint which is at times rare.

 

Thanks to you, our customers

tra snow and sun

The first goal I had when establishing TRA was to prevent injury and needless death to people by creating snow guards that would not fail.  I wanted to be sure dangerous avalanches of snow and ice could be stopped by engineering each snow retention project.  That original objective of safe, dependable, complete systems has carried over to all products we manufacture – solar mounting products, flexible ventilation and snow retention.  Thank-you for your trust in us as we work with you to continue this paramount objective of safety and dependability.

I hope that we are doing a good job in our mission:

  • To offer the highest quality snow retention, solar mounting systems, flexible roof flashing and ventilation products made from superior materials that provide the ultimate in protection, durability and dependability.
  • We strive daily to provide customized service, exceptional engineering, superior manufacturing, and resourceful solutions for each customer, focusing on the unique requirements of each project.
  • Our team is united, innovative and dedicated. Each employee pursues excellence in each company endeavor and realizes that maintaining the good reputation that took decades to establish depends on them.
  • We are not content to simply be successful, but strive to set new and higher standards in all that we do.

As the owner of TRA Snow and Sun, I am responsible for the quality of our products, the service to our customers, and the care of our employees.  Each of these things is supremely important to me, but none are possible without YOU.  The customized service that we provide is dependent on YOU, our customer, working closely with us to engineer systems which are superior and dependable.  Each project is unique and we appreciate your efforts to make your individual project the best possible.

In this time of Thanksgiving, I thank YOU for the opportunity to provide the world with dependable roofing systems.  Thank YOU for your partnership and your trust in TRA Snow and Sun.

Please contact me at any time.  I welcome your suggestions and ideas.

Terry E. Anderson
President
800-606-8980

terry-anderson

32790906-de8c-466d-966a-869e209cbf60

The No Cutting, Time Saving Solar Tile Mount

Solar Tile Mount

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.

What Makes Our Solar Tile Mount Unique?

Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust and fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters.

Tile Mount Hook

Tile Mount Hook3

How Will The Solar Tile Mount Benefit Me As An Installer?

We offer installation materials and resources to make the experience as simple as plan, purchase and install.

Solar Tile Mount are:

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor – No cutting of the tile required
  • Requires no special flashing

Materials/Finishes

  • 6005A-T6 Aluminum / 6005A-T5 Aluminum
  • Mill Finish
  • Black Anodized (upon request)

Testing

Solar Tile Mount has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING!

Tile Mount Hook4 Sol-Up-St-George-7-Solar-Awning

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

The No Cutting, Hassle Free Solar Tile Mount

Solar Tile Mount

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.

What Makes Our Solar Tile Mount Unique?

As mentioned above, TRA Solar Tile Mounts are easy to install and don’t require any cutting. Made of high quality, extruded aluminum that diverts the mount around the tile instead of going through it. With not cutting, this type of mount will not compromise the strength of the customer’s tile. In addition, mounts are adjustable up to six inches for easy layout planning and to make installation easier.

How Will The Solar Tile Mount Benefit Me As An Installer?

Tile Mount Hook3We offer a plethora of installation materials and resources to make experience as simple as plan, purchase, and install.

TRA’s cutting-edge tile mounts are:

  –  made of corrosion-resistant extruded aluminum

  –  quick and easy to install

  –  require no cutting

  –  require no special flashing

Solar mounts must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right.

A Stronger Foundation

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. Click here to contact us for an estimate and to begin your Solar Tile Mount plan today!

TIME FOR A SOLAR MOUNTING CHANGE

Solar-tile-mount-fastening-on-flat-tile-300x300

ARE YOU TIRED OF CUTTING TILE WHEN INSTALLING SOLAR MOUNTING?

Solar on tile roofs is become increasing popular in many parts of the US as the insulative and life cycle cost of tile combined with the benefits of converting sunshine into electricity is recognized. There are markets in Arizona and parts of California where tile makes up 90% of the systems installed. As the population continues to grow throughout, so does the diversity of preferences of roofing applications. As we start to see more and more clay and concrete tile roofing solutions, in some cases installing solar on  tile presents some challenges that are not inherent with the standard shingle roofs. As demand for tile solar mounting increases so does the time spent on cutting tile.

YOUR SOLAR MOUNTING SOLUTION …

Our Solar Tile Mounts Require NO CUTTING Of The Tile & They Are Adjustable Both Horizontally & Vertically With A Height Up To 6”. They Can Be Attached To The Truss Or Rafter With No Tile Cutting Needed! 

NO TILE CUTTING INVOLVED IN THE INSTALLATION PROCESS

Tile Mount Hook

Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters. *Also available in black anodized.

Tile Mount Hook2Tile Mount Hook3

The Perfect Foundation for Solar Systems when it comes right down to it, a solar system is only as good as its mounting structure. That’s why when you need the highest quality roof mounting accessories and fastening systems, you turn to TRA Snow and Sun. Built to last. Built to be reliable. Each and every component in our solar tile mount creates a perfect foundation for your solar systems.

Solar Tile Mount

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof.Corrosion-resistant materials
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor– No cutting of the tile required
  • Requires no special flashing

Materials/Finishes

  • 6005A-T6 Aluminum / 6005A-T5 Aluminum
  • Mill finish
  • Black Anodized (upon request)

Testing

Solar Tile Mount has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING

In making the preferred distance needed to provide the necessary spacing of the micro-inverters and modules so that they are kept at a relatively low temperature, increasing their longevity, while bringing down the costs due to equipment failure. Installation was fast, meaning less cost passed on to the customer.

Tile Mount Hook4 Sol-Up-St-George-7-Solar-Awning

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

Portfolio Items