Posts

Universal Solar Tile Hook made to Fit Most Rails

 twiss-residence-hurricane-ut-progressive-power-solutions-tile-mount

What Makes Our Universal Solar Tile Hook Unique?

With TRA Snow and Sun Universal Solar Tile Hook, there’s no cutting required, saving you time on your project. No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. Our unique wide base of the hook makes the mount very easy to adjust. The Universal Solar Tile Hook allows for fast and easy installation and now available for low, medium, and high profile tile roofs, and are adjustable up to six inches for easy layout for secure attachment to the structural member of the roof. With our unlimited FREE engineered layout on all your projects, we guarantee our high-quality extruded aluminum Solar Tile Hooks are made of the highest quality for superior strength.


How Will The Universal Solar Tile Hook Benefit Me As An Installer?

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. All types of Solar Tile Hooks must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. Click here to contact us for an estimate and to begin your Universal Solar Tile Hook plan today!

Universal Solar Tile Hook

Universal Solar Tile Hook 

–   Available for flat, mid and high profile

–   Adjustable for secure attachment to the structural member of the roof

–   Corrosion-resistant materials

–   Quick and easy to mount

  Decrease Labor– No cutting of the tile required

–   Increase the longevity of our micro-inverters

Materials/Finishes

–   6005A-T6 Aluminum / 6005A-T5 Aluminum

–   Mill finish

–   Black Anodized (upon request)

Testing

Universal Solar Tile Hook has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information contact Gary Heslington at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

The No Cutting, Time Saving Solar Tile Mount

Solar Tile Mount

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.

What Makes Our Solar Tile Mount Unique?

Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust and fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters.

Tile Mount Hook

Tile Mount Hook3

How Will The Solar Tile Mount Benefit Me As An Installer?

We offer installation materials and resources to make the experience as simple as plan, purchase and install.

Solar Tile Mount are:

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor – No cutting of the tile required
  • Requires no special flashing

Materials/Finishes

  • 6005A-T6 Aluminum / 6005A-T5 Aluminum
  • Mill Finish
  • Black Anodized (upon request)

Testing

Solar Tile Mount has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING!

Tile Mount Hook4 Sol-Up-St-George-7-Solar-Awning

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/

The No Cutting, Hassle Free Solar Tile Mount

Solar Tile Mount

No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.

What Makes Our Solar Tile Mount Unique?

As mentioned above, TRA Solar Tile Mounts are easy to install and don’t require any cutting. Made of high quality, extruded aluminum that diverts the mount around the tile instead of going through it. With not cutting, this type of mount will not compromise the strength of the customer’s tile. In addition, mounts are adjustable up to six inches for easy layout planning and to make installation easier.

How Will The Solar Tile Mount Benefit Me As An Installer?

Tile Mount Hook3We offer a plethora of installation materials and resources to make experience as simple as plan, purchase, and install.

TRA’s cutting-edge tile mounts are:

  –  made of corrosion-resistant extruded aluminum

  –  quick and easy to install

  –  require no cutting

  –  require no special flashing

Solar mounts must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right.

A Stronger Foundation

Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. Click here to contact us for an estimate and to begin your Solar Tile Mount plan today!

TIME FOR A SOLAR MOUNTING CHANGE

Solar-tile-mount-fastening-on-flat-tile-300x300

ARE YOU TIRED OF CUTTING TILE WHEN INSTALLING SOLAR MOUNTING?

Solar on tile roofs is become increasing popular in many parts of the US as the insulative and life cycle cost of tile combined with the benefits of converting sunshine into electricity is recognized. There are markets in Arizona and parts of California where tile makes up 90% of the systems installed. As the population continues to grow throughout, so does the diversity of preferences of roofing applications. As we start to see more and more clay and concrete tile roofing solutions, in some cases installing solar on  tile presents some challenges that are not inherent with the standard shingle roofs. As demand for tile solar mounting increases so does the time spent on cutting tile.

YOUR SOLAR MOUNTING SOLUTION …

Our Solar Tile Mounts Require NO CUTTING Of The Tile & They Are Adjustable Both Horizontally & Vertically With A Height Up To 6”. They Can Be Attached To The Truss Or Rafter With No Tile Cutting Needed! 

NO TILE CUTTING INVOLVED IN THE INSTALLATION PROCESS

Tile Mount Hook

Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters. *Also available in black anodized.

Tile Mount Hook2Tile Mount Hook3

The Perfect Foundation for Solar Systems when it comes right down to it, a solar system is only as good as its mounting structure. That’s why when you need the highest quality roof mounting accessories and fastening systems, you turn to TRA Snow and Sun. Built to last. Built to be reliable. Each and every component in our solar tile mount creates a perfect foundation for your solar systems.

Solar Tile Mount

  • Available for flat, mid and high profile
  • Adjustable for secure attachment to the structural member of the roof.Corrosion-resistant materials
  • Corrosion-resistant materials
  • Quick and easy to mount
  • Decrease Labor– No cutting of the tile required
  • Requires no special flashing

Materials/Finishes

  • 6005A-T6 Aluminum / 6005A-T5 Aluminum
  • Mill finish
  • Black Anodized (upon request)

Testing

Solar Tile Mount has been tested from the fail point of the system.

WE DO CUSTOM SOLAR MOUNTING

In making the preferred distance needed to provide the necessary spacing of the micro-inverters and modules so that they are kept at a relatively low temperature, increasing their longevity, while bringing down the costs due to equipment failure. Installation was fast, meaning less cost passed on to the customer.

Tile Mount Hook4 Sol-Up-St-George-7-Solar-Awning

At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.

We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, [email protected], or visit: https://trasnowandsun.com/solar-mounting/