Every once in a while a customer will ask us why they should purchase our metal snow retention rather than the plastic ones they see. We typically don’t like plastic snow guards for many reasons.
Because of its tough nature, metal can withstand the sun’s destructive UV rays. Over time plastic will crack and deteriorate when continuously exposed to the sun.
Unlike metal, plastic snow guards are usually attached to a roof using caulking, which is likely to fail for the following reasons:
Next time you are near a roof with plastic snow guards, see if any are missing and let us know!
We recommend only metal snow retention because we know it can properly protect those in and around your home. For extra protection, we engineer from the sheathing up with the fastener and provide a warranty on the entire snow retention system. Before installation, we engineer a specific layout to see that the system is exactly what you need for your specific location and weather. Contact us with any of your project details and we’ll provide you with the best snow defense system that’ll get you ready for winter.
A question once asked – On the roofs of many houses, along the eave, there are…best as I can describe it… shaped thingies. I’ve seen others that look octagonal and yet others that are round. I’ve seen them on steep roofs and not-so-steep roofs. My bank even has them. They look great, but do they do anything?
The answer is yes. What you’re talking about are called snow guards for retaining snow on the roof. When snow and ice accumulate on the roof, they are pulled by gravity and want to slide down the slope of the roof. A well-designed snow retention system is intended to hold the snow on the roof so that it can melt in place.
At TRA Snow and Sun, we engineer and manufacture over 54+ variations of snow guards, and always welcome custom pieces made just for your roofing project. Yes, 54 may seem a lot, right? And your right it is, and here’s why – every roof design can be complex and is different from material, slope, shape, size, pitch, valleys, etc.., and ground snow loads vary significantly from one area to another. This is why we make several different engineered (from the fail point of the system) snow guards tailored to each unique roof designs for every roof type, new or existing, and in many styles that differ in form and function.
Secure Attachment
Superior Strength
Variety of Material Types
Our first featured spotlight for this month is our unique Snow Guard Bracket D. The Snow Bracket™ D, a permanent snow retention system that is aesthetically pleasing on asphalt shingle roofs. Choose between a vast array of painted powdered colors, available in standard mill finish of steel, copper or aluminum. The Snow Guard Bracket D fastens to roof sheathing to any new construction of an asphalt shingled roof.
Asphalt shingle roofs very common in the United States and it is important you have a Snow Bracket™ that fits the roof type you are installing the product one.
Length: 10″
Width: 1 3/16″
Height: 3″
• Paintlok Steel: 16 ga
• Copper: 48 oz (ASTM B152)
• Stainless Steel: 16 ga (ASTM A240)
• Zinc Plated
• Powder coating available in many Colors
*We can provide Paintlock brackets unpainted BUT they must be painted before installing or rusting will occur. Also, available with attachments see images to the left with Maple & Sunburst.
At TRA Snow and Sun, we engineer and lay out each project free of charge using many factors specific to your roof. We then provide you with the snow retention plan, layout and product detail. TRA Snow and Sun representatives will work with you to design the most efficient snow retention system. Fill out our Snow Retention Checklist to get started.
All Snow Brackets have been tested from the fail point of the system.
One of my older relatives used to say, when confronted with a dilemma, “What to do, what to do….” It made me chuckle!
But, this phrase describes a dilemma for people confronted with snow and ice avalanching off their already installed roof. They want to keep the snow up there
rather than down there
but what is the best solution?
First of all, retrofit is similar as well as different from new construction. Basic questions need to be answered for new and retrofit construction.
For retrofit, snow retention installers don’t have the luxury of applying the snow retention devices as the roofing material is installed in a new project. This is when “What to do, what to do…” might be heard under their breath!
How do you keep snow and ice from falling off while also maintaining a water-tight system when the roofing is already on the roof? How hard is it to do this?
Contractors need a simple and effective solution.
For asphalt shingles, simulated shake, and other similar roofs, using TRA’s H Snow Bracket, there is no need to pull back the headlap to install a device. Butyl or caulking can be applied on the surface of the roofing product, then the bracket is installed directly into the sheathing using screws. A clip is then placed over the screws.
Easy. Effective.
The reason this system will work on retrofit is because TRA’s engineering is done using the specific factors as mentioned above. When installed using the engineered layout, the roof will now hold back the snow and ice that would have fallen off, damaging people or property below.
At TRA Snow and Sun, we help you find an Engineered Solution. Call us for a free layout, provided within 2 working days.
Designed for most roof types
Available with or without fastener cover clip
Can be powder-coated to match roofing material
Available in 16 g steel, 48 oz copper, 26 g Cor-Ten, 16 ga stainless steel, .063″ aluminum
Finishes – Electro-galvanized, hot-dipped galvanized, mill finish aluminum, copper or Cor-Ten
Power-coating available in many colors.
Keeping snow and ice from avalanching off a roof requires a system of superior strength. When strength really does matter to save lives and prevent damage to property, how does a home or business owner know what snow retention product is strong enough?
How does someone decide what product measures up?
How does one decide the best method of installing a safe and reliable roof snow retention system?
If your answer to these questions is, “I can find that out. I’ll just look it up online under building codes or ask my roofing contractor.”
Well, good luck.
There are NO codes for roof snow retention! None. Nil. Nada. (Our owner, Terry Anderson, is serving on a committee right now to finally establish standards. Watch for updates on this in the future!) If a contractor starts sitting codes or standards, be wary. The contractor might have his own standards, and we sure hope they all do, but there are no national or international standards for snow retention.
This makes it very important for owners, architects, engineers, and contractors to take extra care when designing a snow retention system. At TRA Snow & Sun, we seek to offer high-quality snow retention devices ENGINEERED for the unique snow & ice and building conditions relative to each specific project.
Snow retention as a science has emerged as a technological know-how for human safety. The laws of physics have to be used when holding back lots of destructive snow and ice. Annual assets and personal damage from destructive sliding snow and ice is in the millions, however, the price of a human life is incalculable. If someone dies as a result of no snow retention or faulty snow retention, the liability threat to household owners and business proprietors is astronomical.
By retaining snow on the roof of a building and allowing even snow melt-off, injuries to residents/guests and property below the roof of a building can be avoided, saving money and limiting the possibility of personal loss. By installing snow retention you can:
How does one avoid the potential pitfalls to a bad snow retention product?
It can get perplexing with several hundreds of different snow guard types and designs to consider from. With a TRA snow retention system, you know you’re safe because we have gone through extensive product testing. Our products are built to last to the fail point of the snow retention system, not just the product. Unlike other plastic type snow guards that turn yellow and fail over time, TRA’s snow retention systems are superior in strength. Our superior snow retention is designed to manage snow migration on any type of roofing is made of stainless steel or brass.
In simple terms, a first-rate snow retention product coupled with a reliable and safe FREE engineered spacing layout will help lessen the legal responsibility related to the unexpected slid of snow and ice from roofs. All requesting clients can receive free engineered layouts within 2 working days for each project’s specific requirements. For a free layout, data sheets, specs & quote contact us at 855-542-1861.
No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.
Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust and fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters.
We offer installation materials and resources to make the experience as simple as plan, purchase and install.
Solar Tile Mount are:
Materials/Finishes
Testing
Solar Tile Mount has been tested from the fail point of the system.
At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.
We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, ben@trasnowadsun.com, or visit: https://trasnowandsun.com/solar-mounting/
Snow Retention Case Study – Providing Engineered Snow Retention Solutions for HALF THE COST!
TRA Snow and Sun solves problems! It’s not just our motto to provide Engineered Solutions. We really DO IT!
On an addition to a home in Northwest Montana with a high snow load (100 psf); how do you retain snow on a cedar shake roof with a 12/12 pitch, whilst keeping it economical, aesthetically pleasing, and in line with the existing design?
After reviewing their options, Vandelay Construction was ready to order from a competitor, but was concerned about the high cost of the snow retention system, so they did one last internet search of roof snow retention. They found a project with TRA Snow and Sun snow retention in Bozeman, Montana, liked our product and designs, and contacted us.
Using the information the contractor provided to us, we increased the thickness of the copper from the standard ¼” to 3/8” and designed a 3 rail snow retention system (D3H Deck Mount Snow Fence) specific to the project – cedar shake, 12/12 slope, copper, attaching to 16” OC rafters. Copper was used to match the decorative end caps on the heavy timbers in the construction of the building.
Not only did the homeowners get a beautiful, warrantied system, but OUR SYSTEM WAS HALF THE COST OF OUR COMPETITORS.
We love the result. See for yourself.
At TRA, we provide Engineered Solutions to all kinds of problems. Let us help you with your snow retention needs!
TRA Snow and Sun has something every roofer needs: VersaFlash. It’s a must-have for all roofers. We call it the “roofer’s duct tape”. Here’s why you need it for every roofing project.
The primary reason any type of roofing exists is to provide a protective layer to maintain a barrier between the interior of a building and the weather. How this is accomplished can take many different forms, but there’s nothing proven to work better than TRA Snow and Sun’s VersaFlash: flexible aluminum flashing that attaches down with a butyl. It adheres to the wall or other roofing structure or tile, is extremely flexible, and adds a professional finish to all roofing projects, while being extremely effective at sealing out water and preventing leaks.
Some types of VersaFlash are meant just for concrete and clay tile roofing only, while others are effective for all types of roof. Here’s a breakdown of VersaFlash offered by TRA Snow and Sun.
Simply put, VersaFlash is easy to use, flexible, and will save you time and money without sacrificing an inch in quality. There are many reasons you’ll love Aluminum and Copper VersaFlash — here’s why once you choose it, you’ll never roof without it again.
We don’t call it the “roofer’s duct tape” for nothing. VersaFlash is made of flexible, stretchy material that can be used to seal roof-to-wall abutments, chimneys, and basically anything you can think of. It’s very easy to work with so you can get the job done right the first time.
A roofer looking for a go-to roofing adhesive need look no further than VersaFlash. Other than the HD Aluminum Roll (clay and concrete) we offer, VersaFlash will conform to most types of roofs including, but not limited to:
Leave all of your re-flashing worries behind with VersaFlash. It’s highly durable, flexible, and weather resistant. It stretches to a maximum of 33 percent, conforms easily to roof surfaces, and installation is easy. If you want a durable roofing adhesive that won’t give you problems down the road, VersaFlash is the gold standard. On top of it all, TRA Snow and Sun offers a 25-year limited warranty.
TRA Snow and Sun is your number one source for solar mounting, snow retention, flexible ventilation, and flashing material. We offer competitive prices and guarantee our products. Give us a call today at 877-290-8669 for more details, and check out all of our flashing products at trasnowandsun.com.
Common roof architecture of homes in snow regions typically something look like the traditional A-frame or at the least has very steep angles and sides. This is due to the mistaken belief that steep roofs are best because you want to shed snow off the roof, thereby making the entire home safer and less at risk to snow or water damage.
But the truth is far different! At TRA Snow and Sun, we have a fundamentally different belief from the traditional view in that we KNOW that keeping the snow on the roof is far safer for both the home and those who live in the home.
The process of keeping snow on the roof of a home is called snow retention. Snow retention can offer a wide range of advantages to a home owner, including the following:
TRA Snow and Sun has been in business for over 20 years now, but do you know how we started? Terry Anderson, our President and CEO made a trip to Europe several years ago to study snow retention. What he found was quite shocking. In America, most people tried as hard as they could to get snow off their roofs during the winter while those in Europe did everything they could to keep the snow on. After studying this idea for several years, Terry decided to implement them in America and he started TRA Snow and Sun. Watch the video below to learn more about TRA and our philosophy to snow retention.