Menu
With TRA Snow and Sun Universal Solar Tile Hook, there’s no cutting required, saving you time on your project. No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. Our unique wide base of the hook makes the mount very easy to adjust. The Universal Solar Tile Hook allows for fast and easy installation and now available for low, medium, and high profile tile roofs, and are adjustable up to six inches for easy layout for secure attachment to the structural member of the roof. With our unlimited FREE engineered layout on all your projects, we guarantee our high-quality extruded aluminum Solar Tile Hooks are made of the highest quality for superior strength.
Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. All types of Solar Tile Hooks must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. Click here to contact us for an estimate and to begin your Universal Solar Tile Hook plan today!
– Available for flat, mid and high profile
– Adjustable for secure attachment to the structural member of the roof
– Corrosion-resistant materials
– Quick and easy to mount
– Decrease Labor– No cutting of the tile required
– Increase the longevity of our micro-inverters
Materials/Finishes
– 6005A-T6 Aluminum / 6005A-T5 Aluminum
– Mill finish
– Black Anodized (upon request)
Testing
Universal Solar Tile Hook has been tested from the fail point of the system.
At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.
We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information contact Gary Heslington at TRA Snow and Sun at 800-606-8980, gary@trasnowadsun.com, or visit: https://trasnowandsun.com/solar-mounting/
No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.
Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust and fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters.
We offer installation materials and resources to make the experience as simple as plan, purchase and install.
Solar Tile Mount are:
Materials/Finishes
Testing
Solar Tile Mount has been tested from the fail point of the system.
At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.
We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, ben@trasnowadsun.com, or visit: https://trasnowandsun.com/solar-mounting/
No hassle is bigger for an installer than finding out you have to re-cut tile because it won’t line up. With TRA Snow and Sun Solar Tile Mount, there’s no cutting required, saving you time on your project. Our Solar Tile Mounts are available for low, medium, and high profile tile roofs, and are adjustable for secure attachment to the structural member of the roof. We guarantee a variety of tile mounts, superior strength, and the option for custom made designs.
As mentioned above, TRA Solar Tile Mounts are easy to install and don’t require any cutting. Made of high quality, extruded aluminum that diverts the mount around the tile instead of going through it. With not cutting, this type of mount will not compromise the strength of the customer’s tile. In addition, mounts are adjustable up to six inches for easy layout planning and to make installation easier.
We offer a plethora of installation materials and resources to make experience as simple as plan, purchase, and install.
TRA’s cutting-edge tile mounts are:
– made of corrosion-resistant extruded aluminum
– quick and easy to install
– require no cutting
– require no special flashing
Solar mounts must be fastened to structural members of the roof, such as rafters, purlins or trusses, and in order for tile pans to line up in the correct locations, are adjustable up to six inches to the left or right.
Your solar energy system is only as strong as the mounting structure on which it’s built. We guarantee top-of-the-line products, accessories, and fastening systems. Every component is reliable and built to last. Click here to contact us for an estimate and to begin your Solar Tile Mount plan today!
Solar on tile roofs is become increasing popular in many parts of the US as the insulative and life cycle cost of tile combined with the benefits of converting sunshine into electricity is recognized. There are markets in Arizona and parts of California where tile makes up 90% of the systems installed. As the population continues to grow throughout, so does the diversity of preferences of roofing applications. As we start to see more and more clay and concrete tile roofing solutions, in some cases installing solar on tile presents some challenges that are not inherent with the standard shingle roofs. As demand for tile solar mounting increases so does the time spent on cutting tile.
Our Solar Tile Mounts Require NO CUTTING Of The Tile & They Are Adjustable Both Horizontally & Vertically With A Height Up To 6”. They Can Be Attached To The Truss Or Rafter With No Tile Cutting Needed!
Our high-quality material extruded aluminum and divert the mount around the tile instead of going directly through the tile, which decreases install time, and doesn’t compromise the strength or coverage of the customer’s tile. The wide base of the hook makes the mount very easy to adjust. The new tile hook allowed for fast and easy installation. It also helps increase the longevity of our micro-inverters. *Also available in black anodized.
The Perfect Foundation for Solar Systems when it comes right down to it, a solar system is only as good as its mounting structure. That’s why when you need the highest quality roof mounting accessories and fastening systems, you turn to TRA Snow and Sun. Built to last. Built to be reliable. Each and every component in our solar tile mount creates a perfect foundation for your solar systems.
Materials/Finishes
Testing
Solar Tile Mount has been tested from the fail point of the system.
In making the preferred distance needed to provide the necessary spacing of the micro-inverters and modules so that they are kept at a relatively low temperature, increasing their longevity, while bringing down the costs due to equipment failure. Installation was fast, meaning less cost passed on to the customer.
At TRA Snow and Sun, we engineer and layout each project free of charge using many factors specific to your project. We then provide you with; rail spans, max loads on components, wind parameters, solar panel geometry, force per foot on rail and panels, a schematic of the module field, the wind speed, shipping weight, and project details. TRA Snow and Sun representatives will work with you to design the most efficient solar mounting system.
We can design your awning to work with a variety of application. Just give us your project details & we will design your Mounting Solution to fit your project. For more information call Ben Anderson at TRA Snow and Sun at 800-606-8980, ben@trasnowadsun.com, or visit: https://trasnowandsun.com/solar-mounting/
GZO Sheet Metal & Roofing specializes in Architectural Metals and Custom Metal and Copper Fabrications in Aspen, Colorado and the Roaring Fork Valley for over 12 years. But they came upon a problem they weren’t quite sure they had the expertise, time or desire to tackle.
Their customer had a PV solar system mounted on his metal panel roof, but the solar panels were creating a dangerous snow and ice problem. Every time the garage door opened to let a car in or out, a huge avalanche of snow spilled off the first row of panels and slid over the eave, right onto the incoming or outgoing car. This was a real nuisance and concern to the owner, who also happened to be an architect! His family learned to open or close the garage door, wait for the avalanche, and then move in or out. There had to be a better and less dangerous way to enter and exit the garage.
Naturally, the solar arrays were installed to capture as much of the sun’s rays as possible, but the desire for optimal sun capture on the first course of panel arrays became a secondary issue in light of the danger of falling snow and ice. The decision to protect people and property became paramount. Rows of panels further up the roof could continue to shed snow so that sunlight could be captured on them, but the first row needed some type of snow retention.
Tom Hegerty, owner of GZO, was called in. GZO did not want to create a make-shift snow fence in their shop sothey turned to TRA, who had helped with custom designed systems in the past. This was a very unusual issue Hegerty and TRA had not run into before.
Hegerty provided TRA’s technical experts with a simple, hand-drawn sketch of what he envisioned- a taller than normal clamp which would raise the snow fence a few inches higher than the downhill edge of the panel, stopping the snow and ice from moving over the edge. Using that simple drawing, the engineers at TRA Snow & Sun then computer designed a custom 2 rail fence, and provided an exact detail to scale so Hegerty could approve it. An appropriate power-coated color was matched to the existing metal panel, the homeowner approved the design and production began on the unusual snow fence. The process of designing the new, customized snow fence began in March, with manufacture and shipping following soon after. Installation of the fence was completed in April, just in time for unexpected and unusually heavy snowfalls in May.
The end result was a manufactured, custom C22Z Standing Seam Snow Fence, that clamps onto the standing seam metal panel, and wraps around the front edge of the solar panel to prevent snow from falling off the panel. The snow fence extends high enough at the bottom edge of the panels to keep snow and ice from damaging property or people on the ground below. The new design was tested earlier than expected when heavier than normal snowstorms hit the area during May. TRA’s customized snow fence performed perfectly. Vehicles and people now enter and exit the garage with no further waste of time or fear of being bombarded by snow and ice.
GZO Sheet Metal & Roofing Inc. specializes in architectural metals and custom metal and copper fabrications for all types of roofing – wood shingles, standing seam, slate, asphalt shingles, membrane roofing and tapered deck systems They are focused on superior craftsmanship, attention to detail, clear communication, honesty and integrity.
TRA Snow and Sun, Inc., located in American Fork, Utah, offers Roof Snow Retention Devices, Solar Mounting Systems and Roof Flashing Solutions. They supply to all types of customers, from the individual homeowner to the big developer and free engineered designs of all their systems. For more information call Devin Hancock at TRA Snow and Sun at 800-606-8980, devin@trasnowandsun.com, or visit https://trasnowandsun.com
Main Office
1657 South 580 East
American Fork, UT 84003
Contact Us
Local: 801-756-8666
Toll Free: 877-290-8669
FAX
801-756-7891
HOURS:
Phone Hours:
7:00 AM – 6:00 PM (MT) M-F
Office Hours:
8:00 AM – 5:00 PM (MT) M-F
Will Call Hours:
8:00 AM – 4:30 PM (MT) M-F